Brazed Cartridges
We supply cartridges to your requirements. Specify the configuration you need according to the identification system shown below. Assistance in specifying your required configuration is available simply by calling us at 888-547-4156.
 
 
Brazed PCD/PCBN Cartridge Identification System
Example: UCDR-32-00
UC = Ultra-Mill UE = Endmill;
MS = 90° Mount
WS = Wedge Style 		 
D = PCD B = Borazon
C = Carbide
D = PCD		  
R = Right hand L = Left hand  
3 = Nose radius 0 = 0.000
1 = 0.010
2 = 0.030
3 = 0.060		 4 = 0.090
5 = 0.016
6 = 0.100
2 = Wiper flat 0 = No wiper
1 = 0.060
2 = 0.080		 3 = .100
4 = .120
0 = Cartridge style 0 = Standard
1 = Two phase
2 = Long edge
3 = Boring		 4 = Short
5 = Chip Guard
6 = No drag
0 = Maximum DOC 0 = .200 Standard
1 = .250
2 = .375		 3 = .500
4 = .625
Back to top
Recommended cartridge for all standard purposes is UCDR-33-00.
If cutter body has Set Height of under 2.00" use UCDR-33-40 short cartridge.
Any special Radius or Wiper will use the cutter number w/-5 (ex: UTXXXX-5).
Long Edge insert is 0.12 wide.

Industry Chart

Styles can be provided in any industry cartridge

Ultra-Tool Kennametal Wenco Mapal Clapp & Haney Valenite
UCDR-33-00          
UCDR-21-00          
MSDR-22-00CH K30BPD100R     SCR-100-031-E1  
MSDR-42-00CH K90BPD100R     SCR-100-093-E1  
UEDR-22-00CH KEDR-100-031-E1     EDR-100-031-E1  
UEDR-42-00CH KEDR-100-093-E1     EDR-100-093-E1  
WSDR-22-00CH KSDR-100-031-E1     SDR-100-031-E1  
WSDR-42-00CH KSDR-100-093-E1     SDR-100-093-E1  
MSDR-42-00CH   FMC90      
MSDR-22-01W   FMC30      
UEDR-22-01W   FMC12   EMC12  
MSDR-42-00M     7-02801-02    
VFAB75BAR         VFAB75BAR
VFAB90BAR         VFAB90BAR
Back to top

  For sales and technical assistance call 888-547-4156