DIAbide Endmills

for Machining Non-Metallic Materials

and Non-ferrous Metals

Catalog

For pricing contact sp³ at 888-547-4156

General purpose endmills are listed in two tables: fractional inch sizes in diameters from 1/64" to 1", and metric sizes in diameters from 1 mm to12 mm.

To select the optimum tool for your application refer to Material/Tool Selection or to the full guide to Material Application Codes.
Append MAC number to part number when ordering.
MAC 1 is a DLC coating.

Available from stock

Jump to metric sizes.

For other types of endmills select from the following:
Fractional inch size endmills with corner radius.
Profiling endmills.
Premium moldmills.

STANDARD FRACTIONAL INCH SIZE ENDMILLS
Cutting Diameter	Shank Diameter	Length of Cut	Overall Length	Number of Flutes	Part No.		MAC
Cutting Diameter	Shank Diameter	Length of Cut	Overall Length	Number of Flutes	Square	Ball Nose	1	3	5	7

.010	1/8	.030	1-1/2	2	12205	—	—	—		—
.010	1/8	.030	1-1/2	2	—	12206	—	—		—

1/64	1/8	3/64	1-1/2	2	12120	–	—			—
				4	12121	–				—
				2	–	12122	—			—
				4	—	12350				—

1/32	1/8	3/32	1-1/2	2	12102	–	—			—
				2	–	12104	—			—
				4	12103	–				—
				4	–	12105				—

3/64	1/8	3/16	1-1/2	2	12106	–	—			—
				2	–	12108	—			—
				4	12107	–				—
				4	–	12109				—

1/16	1/8	1/4	1-1/2	2	12091	–	—			—
				2	–	12093	—			—
				4	12092	–				—
				4	–	12094				—

5/64	1/8	1/4	1-1/2	2	12110	–	—			—
				2	–	12112	—			—
				4	12111	–				—
				4	–	12113				—

3/32	1/8	3/8	1-1/2	2	12118	–	—			—
				2	–	12119	—			—
				4	12039	–				—
				4	–	12048				—

1/8	1/8	1/2	1-1/2	2	12001	–	—
				2	–	12020	—
				4	12002	–
				4	–	12021
		1	3	4	12040	–
			3	4	–	12049
			4	4	—	12360	—

3/16	3/16	5/8	2	2	12004	–	—
				2	–	12023	—
				4	12005	–
				4	–	12024
		1	4	4	12041	–	—
		1	4	4	–	12050	—

1/4	1/4	3/4	2-1/2	2	12007	–	—
				2	–	12026	—
				4	12008	–
				4	–	12027
		1-1/4	4	4	12042	–	—
			4	4	–	12051	—
			6	4	12043	–	—
			6	4	–	12052	—

5/16	5/16	13/16	2-1/2	2	12010	–	—
				2	–	12029	—
				4	12011	–	—
				4	–	12030	—
		1.312	3	4	12369	—	—
		1-1/2	4	4	12044	–	—
			4	4	–	12053	—
			4	6	12370	–	—
			4	6	–	12371	—

3/8	3/8	1	2-1/2	2	12013	–	—
				2	–	12032	—
				4	12014	–	—
				4	–	12033	—
		1-1/2	4	4	12045	–	—
				4	–	12054	—
				4	12046	–	—
				4	–	12055	—
		1.312	3	4	12374	–	—

1/2	1/2	1	3	2	12016	–	—
				2	–	12035	—
				4	12017	–	—
				4	–	12036	—
		2	4	4	12047	–	—
		2	4	4	–	12056	—
		3	6	4	12019	–	—
		3	6	4	–	12038	—

3/4	3/4	1-1/2	4	4	12198	—	—
3/4	3/4	1-1/2	4	4	—	12200	—

1	1	1-1/2	4	4	12199	—	—
1	1	1-1/2	4	4	—	12201	—
All dimensions are in inches. *Maximum diamond-coated flute length is 2-1/2".

SHORTYS—FRACTIONAL INCH SIZES
Cutting Diameter	Shank Diameter	Length of Cut	Overall Length	Number of Flutes	Part No. Square	MAC 5

3/64	1/8	3/64	1-1/2	2	12822
				4	12823

3/32	1/8	1/8	1-1/2	2	12825
				4	12826

1/8	1/8	1/8	1-1/2	2	12827
All dimensions are in inches.

Tolerances – Standard Fractional Inch Endmills
All dimensions in in.	Cutting Diameter	Shank Diameter	Runout	Length of Cut	Overall Length
MAC 3 and 5	+0.000/-0.002	-0.0000/-0.0004	<0.001	+.060/-.000	±.060
MAC 7	+0.001/-0.001	-0.0000/-0.0010	<0.002	+.060/-.000	±.060

STANDARD METRIC SIZE ENDMILLS
Cutting Diameter	Shank Diameter	Length of Cut	Overall Length	Number of Flutes	Part No.		MAC
Cutting Diameter	Shank Diameter	Length of Cut	Overall Length	Number of Flutes	Square	Ball Nose	1	3	5	7

1	3	4	38	2	12114	–	—	—		—
				4	12115	—	—	—		—
				2	—	12116	—	—		—
				4	–	12117	—			—

2	3	10	40	4	12057	–	—			—
			40	4	–	12074	—			—
			65	4	12058	–	—			—
			65	4	–	12075	—			—

3	3	15	40	4	12059	–	—			—
		15	40	4	–	12076	—			—
		25	75	4	12060	–	—			—
		25	75	4	–	12077	—			—

4	4	15	50	4	12061	–	—			—
		15	50	4	–	12078	—			—
		25	75	4	12062	–	—			—
		25	75	4	–	12079	—			—

6	6	20	60	4	12063	–	—			—
		20	60	4	–	12080	—			—
		40	100	4	12064	–	—			—
			100	4	–	12081	—			—
			150	4	12065	–	—			—
			150	4	–	12082	—			—

8	8	20	65	4	12066	–	—			—
		20	65	4	–	12083	—			—
		40	100	4	12067	–	—			—
		40	100	4	–	12084	—			—

10	10	26	65	4	12068	–	—			—
		26	65	4	–	12085	—			—
		40	100	4	12069	–	—			—
			100	4	–	12086	—			—
			150	4	12070	–	—			—
			150	4	–	12087	—			—

12	12	30	75	4	12071	–	—			—
		30	75	4	–	12088	—			—
		50	100	4	12072	–	—			—
		50	100	4	–	12089	—			—
		75**	150	4	12073	–	—			—
		75**	150	4	–	12090	—			—
All dimensions are in mm. **Maximum diamond-coated flute length is 63 mm.

SHORTYS—METRIC SIZES
Cutting Diameter	Shank Diameter	Length of Cut	Overall Length	Number of Flutes	Part No. Square	MAC 5

1.0	3	1.5	38	2	12820
				4	12821

2.0	3	3	38	4	12824

All dimensions are in mm.

Tolerances – Standard Metric Size Endmills
All dimensions in mm.	Cutting Diameter	Shank Diameter	Runout	Length of Cut	Overall Length
MAC 3 and 5	+0.000/-0.05	-0.000/-0.01	<0.025	+1.50/-.00	±1.5

sp³ will supply a free sample for a new application

To order call 888-547-4156

OverviewMachining GuidelinesApplications

DIAbide Endmills

for Machining Non-Metallic Materials

and Non-ferrous Metals

Catalog

For pricing contact sp3 at 888-547-4156

STANDARD FRACTIONAL INCH SIZE ENDMILLS

.010

1/64

1/32

3/64

1/16

5/64

3/32

1/8

3/16

1/4

5/16

3/8

1/2

3/4

1

SHORTYS—FRACTIONAL INCH SIZES

3/64

3/32

1/8

STANDARD METRIC SIZE ENDMILLS

1

2

3

4

6

8

10

12

SHORTYS—METRIC SIZES

1.0

2.0

sp3 will supply a free sample for a new application

To order call 888-547-4156

For pricing contact sp³ at 888-547-4156

sp³ will supply a free sample for a new application