|
DIAbide Insertsfor Machining Non-Metallic Materialsand Non-ferrous Metals |
MAC 10 Catalog |
|
DIAbide Insertsfor Machining Non-Metallic Materialsand Non-ferrous Metals |
MAC 10 Catalog |
| This page lists MAC 10 inserts. For a full guide to
Material Application Codes refer to the MAC
Overview. Append MAC number to part number when ordering. For applications requiring exceptionally good finish on non-ferrous metal, a polished flank is optionally available. Add the suffix “P” to the part number. Click here for tolerance information. |
| Inserts are listed in alphabetical order of ANSI
ID. I.C. = Inscribed Circle.  Available from stock |
| ANSI ID | ISO ID | I.C. | Part Number |
MAC |
| 10 | ||||
 CCGX-21.50 |
CCGX
060202 |
1/4 | 16101 | |
| CCGX-21.51 |
CCGX
060204 |
1/4 | 16102 | |
| CCGX-32.51 |
CCGX
09T304 |
3/8 | 16103 | |
| CCGX-32.52 |
CCGX
09T308 |
3/8 | 16104 | |
| CCGX-431 |
CCGX
060404 |
1/2 | 16105 | |
| CCGX-432 |
CCGX
060408 |
1/2 | 16106 | |
| DCGX-21.50 |
DCGX
070202 |
1/4 | 16150 | |
| DCGX-21.51 |
DCGX
070204 |
1/4 | 16151 | |
| DCGX-32.50 |
DCGX
11T302 |
3/8 | 16152 | |
| DCGX-32.51 |
DCGX
11T304 |
3/8 | 16153 | |
|
||||
| DCGX-32.52 |
DCGX
11T308 |
3/8 | 16154 | |
| TCGX-1.81.50 |
TCGX
090202 |
1/4 | 16268 | |
| TCGX-1.81.51 |
TCGX
090204 |
1/4 | 16269 | |
| TCGX-21.50 |
TCGX
110202 |
1/4 | 16270 | |
| TCGX-21.51 |
TCGX
110204 |
1/4 | 16271 | |
| TCGX-32.51 |
TCGX
16T304 |
3/8 | 16272 | |
| TCGX-32.52 |
TCGX
16T308 |
3/8 | 16273 | |
| TDAB-51 |
– | 5/32 | 16287 | |
| TEC-322T |
TECN
160308T |
3/8 | 16289 | |
| TEEN-32W3-TR20W |
TECN
1603PTRW |
3/8 | 16291 | |
|
||||
| TEG-322A |
TEGN
160308E |
3/8 | 16293 | |
| TEG-422A |
TEGN
220308E |
1/2 | 16294 | |
| TEGA-320 |
TEGA
160302 |
3/8 | 16296 | |
| TEGA-321 |
TEGA
160304 |
3/8 | 16297 | |
| TEGA-322 |
TEGA
160308 |
3/8 | 16298 | |
| TEGA-326 |
TEGA
160324 |
3/8 | 16301 | |
| TEGA-328 |
TEGA
160332 |
3/8 | 16302 | |
| VCGX-21.50 |
VCGX
110202 |
1/4 | 16369 | |
| VCGX-21.51 |
VCGX
110204 |
1/4 | 16370 | |
| VCGX-331 |
VCGX
160404 |
3/8 | 16371 | |
|
||||
| VCGX-332 |
VCGX
160408 |
3/8 | 16372 | |
| VCGX-333 |
VCGX
160412 |
3/8 | 16373 | |
| Back to top |
| Back to top |
 |
To order call 888-547-4156 |
For DIAbide inserts, the thickness of the diamond
coating will vary as a function of the MAC number. The lowest MAC numbers, such
as MAC 10, have films approximately 10 microns thick (0.0004 inch) on a side
and the highest MAC number, MAC 20, can have coatings up to 50 microns (0.002
inch) on a side. Coating thickness is held to ±20% within an insert and
from insert to insert. Call sp3 for exact film thickness information if
this extra material poses a problem for your machining operations.