DIAbide Profiling Endmills

for Machining Non-Metallic Materials

and Non-ferrous Metals
 

Catalog

For pricing contact sp3 at (888) 547-4156

To select the optimum tool coating type for your application refer to the MAC table.
Append MAC number to part number when ordering.
Available from stock. MAC 1 (DLC) coating available; allow one to two week lead time.
sp3 can supply other profiling endmill configurations on special order.

PROFILING ENDMILLS – FRACTIONAL INCH SIZES
Cutting
Diameter		 Shank
Diameter		 Length
of Cut		 Overall
Length		 Reach Corner
Radius		 Number
of Flutes		 Part No. MAC 5
Square Corner
Radius		 Ball
Nose
1/16
 1/8 1/16 3 .75 — 4 12850 — —
1/16 3 .75 — 4 — — 12810
3/32
 1/8 3/32 3 .75 — 4 12851 — —
3/32 3 .75 — 4 — — 12811
1/8
 1/8 1/8 3 1.50 — 4 12852 — —
1/8 3 1.50 .015 4 — 12853 —
1/8 3 1.50 — 4 — — 12812
1/8 4 1.50 — 4 12854 — —
1/8 4 1.50 .015 4 — 12855 —
3/16
 3/16 3/16 3 1.87 — 4 — — 12816
1/4
 1/4 1/4 4 2.00 — 4 12856 — —
1/4 4 2.00 .015 4 — 12857 —
1/4 4 2.00 .062 4 — 12858 —
1/4 4 2.00 — 4 — — 12813
5/16
 5/16 5/16 4 2.00 — 4 — — 12815
3/8
 3/8 3/8 4 2.00 — 4 12859 — —
3/8 4 2.00 0.015 4 — 12860 —
3/8 4 2.00 — 4 — — 12814
1/2
 1/2 1/2 4 2.00 — 4 12861 — —
1/2 4 2.00 0.015 4 — 12862 —
1/2 4 2.00 — 4 — — 12818
All dimensions are in inches.
Back to top

Tolerances – Standard Fractional Inch Endmills
All dimensions
in inches		 Cutting
Diameter		 Shank
Diameter		 Runout Length
of Cut		 Overall
Length
MAC 5 +0.000/-0.002 -0.0000/-0.0004 <0.001 +.060/-.000 ±.060
Back to top

PROFILING ENDMILLS – METRIC SIZES
Cutting
Diameter		 Shank
Diameter		 Length
of Cut		 Overall
Length		 Reach Corner
Radius		 Number
of Flutes		 Part No. MAC 5
Square Corner
Radius		 Ball
Nose
3.0
 3 3 75 20 — 4 12470 — —
3 75 20 0.2 4 — 12471 —
3 75 20 — 4 — — 12472
6.0
 6 6 100 38 — 4 12473 — —
6 100 38 0.5 4 — 12474 —
6 100 38 — 4 — — 12475
8.0
 8 8 100 50 — 4 12476 — —
8 100 50 0.5 4 — 12477 —
8 100 50 — 4 — — 124782
10.0
 10 10 100 50 — 4 12479 — —
10 100 50 0.5 4 — 12480  
10 100 50 — 4 — — 12481
12.0
 12 12 100 50 — 4 12482 — —
12 100 50 0.5 4 — 12483 —
12 100 50 — 4 — — 12484
All dimensions are in mm.
Back to top

Tolerances –Metric Endmills
All dimensions
in mm		 Cutting
Diameter		 Shank
Diameter		 Runout Length
of Cut		 Overall
Length
MAC 5 +0.000/-0.002 -0.0000/-0.0004 <0.001 +.060/-.000 ±.060
Back to top
 

To order call 888-547-4156

OverviewEndmill CatalogMachining GuidelinesApplications