DIAbide Corner Radius Endmills

for Machining Non-Metallic Materials

and Non-ferrous Metals
 

Catalog

For pricing contact sp3 at (888) 547-415

To select the optimum tool coating type for your application refer to the MAC table.
Append MAC number to part number when ordering.
Available from stock

CORNER-RADIUS ENDMILLS – FRACTIONAL INCH SIZES
Cutting
Diameter		 Shank
Diameter		 Length of Cut Overall
Length		 Number
of Flutes		 Corner
Radius 		Part No. MAC
3 5 7
1/16
 1/8 3/16 1-1/2 4 .015 12123 —
1/8
 1/8 1/2 1-1/2 4 .015 12095 —
1 3 4 .015 12096 —
4 .030 12124 —
1/4
 1/4 3/4 2-1/2 4 .015 12097 —
1-1/2 4 4 .015 12098 —
4 .030 12099 —
1/2
 1/2 1-1/2 4 4 .030 12379 —
1 3 4 .015 12126 —
3* 6 4 .015 12100 —
4 .030 12101 —
Dimensions: All dimensions are in inches.
*Maximum diamond-coated flute length is 2-1/2".
Back to top

In addition to the standard corner-radius endmills listed in this table, sp3 can supply any of its standard endmills (listed on this website) with a corner radius on request.

Tolerances – Standard Fractional Inch Endmills
All dimensions in in. Cutting
Diameter		 Shank
Diameter		 Runout Length
of Cut		 Overall
Length
MAC 3 and 5 +0.000/-0.002 -0.0000/-0.0004 0.001 +.060/-.000 ±.060
MAC 7 +0.001/-0.001 -0.0000/-0.0010 0.002 +.060/-.000 ±.060
Back to top
 

To order call 888-547-4156

OverviewEndmill CatalogMachining GuidelinesApplications